Aterid is an obsidian like ore. On first glance it may be confused with a metal, Aterid is brittle to the touch and easy to melt. Aterid is famed for its properties to interact with the matter of magic itself. It is formed by long sun light exposure, especially during Novae, thus it is often found on surface stone in high altitude e.g. on mountain tops.
Pure Aterid
Pure Aterid is usually scraped off of mountain tops can be easily molten and reshaped. As a rule of thumb, the higher the altitude and the longer the undisturbed radiation, the higher the degree of Aterid purity and the stronger its properties.
Aterid has energy reflective properties, or to be more precise, pure Aterid is Thaumaphobe and cannot be touched directly by magic.
Applications
Aterid is as mentioned, often used in protective or storage capacities. However, as Aterid is brittle and melts easily, pure Aterid is not a great component on its own. Therefore Aterid alloys are often found for protective gear, to balance out Aterids weak physical properties. Another common approach is to grind Aterid and mix it with paint, to create a protective coating when dry or to submerge fabrics in.
Skoliat
Skoliat is an emulsion of grind up aterid in a transmissive jelly. It has energy retentive properties depending on the particle size of the aterid dust and its density. High density skoliat can hold large amounts of energy in the jelly, but is volatile upon impact. High particle size skoliat holds energy in the particles, with the jelly acting as a containant. High particle skoliat is very stable, but requires an energy input to release its energy in an endothermic reaction. Skoliat energy discharge is explosive in nature. Once discharged there is no way to restore it again. However, it is greatly cheaper than using Galimet, as it can be produced from every kind of aterid residue and production left overs. Even low purity Galimet cane be reworked into Skoliat.
Galimet
Galimet is aterid sediment found on the bottom of glacial rivers and lakes. Aterid minerals are taken downstream from mountain tops by rain and glacial melting. Galimet hardens upon drying, but during the process it can be put into a form. After hardening, Galimet cannot be rehydrated, turns into a crystal like structure, that it is highly stable. Galimet can be charged and recharged with nova energy. Shattering a Galimet crystal does not release its energy. Galimet requires only a minor energy input to release either a controlled burst or steady stream of energy. Galimet heats up upon energy release and may shatter prematurely if it releases too much energy in rapid succession or without proper cooling. However, if treated properly a high quality Galimet battery will last a lifetime.
Galimet forming, discharging, and recharging is the basis for technology in Kamolin. On an industrial scale Aterid mirror parks are used to charge Galimet batteries.